Product Details
Overview
Service Entrance Cable, Type SE, Style SER and SE Stype U. Service Entrance Cable, 600 Volt. Individual Conductors Rated XHHW-2 or THHN/THWN. Jacket and Individual Conductors Sunlight Resistant.
Application
Type SE, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SER may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts.
Standards:
Type SE cable complies with:
• ASTM- All applicable standards
• UL Standard 44 for XHHW-2 conductors
• UL Standard 83 for THHN/THWN conductors
• UL Standard 854
• ASTM- All applicable standards
• UL Standard 44 for XHHW-2 conductors
• UL Standard 83 for THHN/THWN conductors
• UL Standard 854
Specifications
Low Voltage
UV Resistance
Working Temperature 90℃
construction
Type SE cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THHN/THWN conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant gray polyvinyl chloride (PVC). Available as 1 conductor with a concentric ground, 2 conductor with a round or concentric ground, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant polyvinyl chloride (PVC).
- DEXIN CABLE
- UL CABLE
- UL 4703 Solar PV Cable
- Hook Up Wire - UL1015
- Teck 90 Cable
- Copper RW90 600V XLPE Insulation Cable
- SOOW Portable Power Cable
- Type THHN/THWN/T90 Wire
- Type AC(BX) Steel Armored Cable
- Nonmetallic-Sheathed Cable Type NM-B
- MC Cable With THHN Ground
- Nonmetallic-Sheathed Cable Certified for Canada Type NMD90
- Metal-clad Cable Certified for Canada Type AC90
- TC Tray Cable FR-XLPE/PVC
- SDW Cable
- Welding Cable 105°C 600V
- DLO Cable or Diesel Locomotive Cable
